Atrium – A22

The A22 is ATRIUM’s powerful Web-Based IP hybrid module. The flexibility of the A22 module allows it to be set either as 1 or 2-door controller or expander (2 in 1).

The A22 includes an embedded web server that combines performance and simplicity enabling you to manage Users/Cards, lock or unlock doors, view system events and display controller information from anywhere in the world!

Industry-unique and effortless card enrollment mode minimizes system start up and simplifies your life. A pre-assembled universal power supply is included with every A22, making this unit an industry leader in efficiency and simplicity. Specifications

• Controls 2 doors and 2 readers
• Pre-assembled universal plug-in power supply (120V/240V) included
• Convert any A22 door controller to an A22EC elevator controller by simply updating the firmware for free (up to 256 floors).
• On-board Ethernet Port with AES 256-bit encryption
• On-board RS485 communication bus, 1220 m (4000 feet)
• On-board Embedded Web Server
• Auto-detect hardware modules
• Quick and easy card enrollment procedure
• Lock outputs: 2 (750mA @ 12VDC/each)
• Relay Outputs: 2 Form C relays (Dry Contact) 5A @ 250VAC, 7A @ 125VAC, 7A @ 30VDC
• 6 multi-purpose inputs (12 using zone doubling)
• Completely fuseless system
• Up to 10,000 users
• Up to 10,000 cards
• Up to 25,000 Event Buffer
• Ultra fast firmware updating
• FREE Management Software
• Maintenance-friendly snap on terminal connectors
• Comprehensive LED status indicators

ADH10 – Schlage Door Handle Integration Controller

When esthetics of your door handles is an important factor for you, this Access Control Module allows you to control up to ten Electronic Door Locking Handles such as LE SCHLAGE door handles. The ATRIUM multi-account software will support up to 100 door handles per account. Effortless auto-detect technology identifies the SCHLAGE door handle on the communication bus and a pre-assembled universal power supply is included with every ADH10. Specifications

• Controls up to 10 Schlage AD 300/400 or NDE series door handles
• Pre-assembled universal power supply (120V / 240V)
• Embedded Web Server (On-board Ethernet Port with AES 256-bit encryption)
• Auto-detect hardware modules
• Completely fuseless system
• Up to 10,000 users
• Up to 10,000 cards
• Up to 25,000 Event Buffer
• Comprehensive LED status indicators

KT-400 Ethernet-Ready Four-Door Controller

KT-400 is an Ethernet-ready four-door controller that provides 128-bit AES encrypted communication with the EntraPass Security Software and is a highly secure solution for any security-conscious business. KT-400 can easily be integrated into an existing EntraPass system with other Kantech controllers (KT-1 and KT-300), or basic door security without the need to connect to a host system when in Standalone Mode – providing the foundation for a brand new security installation.

With an onboard Ethernet port, an external IP device isn’t required to connect to the network. The onboard port is dual-sensing, which means the system senses whether the connection is 10Base-T or 100Base-T and adjusts automatically for faster connectivity. KT-400 manages network polling and communicates with the EntraPass Gateway only when an event has occurred. Communication integrity is ensured through a heartbeat signal which is sent at regular intervals to the EntraPass system. This asynchronous communication significantly reduces the amount of bandwidth required to manage the access control system over the network.

Specifications

• Configure and manage four doors using a simple embedded web browser – no software to purchase and install (Standalone Mode, KT-400rev1)
• Intuitive configuration wizard for quick set up (Standalone Mode, KT-400rev1)
• Onboard Ethernet 128-bit AES-encrypted communication with the EntraPass system ensures a high degree of network security
• 100,000 cards capacity and provides up to 20,000 concurrent events in stand-alone mode
• 256 outputs (four onboard) provide scalability
• Communicates with the EntraPass Gateway only when an event has occurred, ensuring low network bandwidth consumption (Special and Corporate Editions only)
• Verify and configure IP settings with a built-in web configuration page
• Supervised door lock outputs with internal or external power supply
• LEDs provide important controller status and diagnostic information
• Additional battery supervision and monitoring help ensure controller functionality
• Compatible with EntraPass Security Management Software v6.02 or higher

KT-300 Door Controller

The KT-300 door controller supports up to two readers, which can be installed either on a single door (to monitor both entry and exit) or on two separate doors. It provides connections for all peripheral devices necessary for a complete access control system and can be linked with other door controllers to provide control over millions of doors. Stand-alone mode protects against power or system failures and the system stores cardholder and event data, which is automatically transmitted back to the EntraPass system once the network connection is restored. Flash memory allows for firmware updates from an EntraPass workstation in just a few minutes. Built-in Combus expansion means that relay, input, and output modules can be added to connect HVAC systems, elevators, motion detectors, and more. The Combus is a communication protocol that is integral to the KT-300. It uses a four-conductor cable bus to which several expansion modules can be connected. Specifications

• Controls two doors and easily links to a network
• Update the firmware directly from system workstation
• Fast, up to 115,200 baud
• Ready to go, no DIP switches or jumpers to set
• 5V and 12V reader power
• Interfaces with an external alarm system
• Supervises battery conditions and reports low battery/no battery status to the system
• Automatic trouble reporting
• All power outputs are individually protected against short circuits and surges by a self-resetting PTC
• Choice of two memory capacities, 128K or 512K

PCMD – Mifare® EV1 Desfire Card Programmer

CDVI has a variety of proximity cards and tags available, and with different technologies (125khz or MifareTM). You can choose between regular clamshell cards, mini PVC sticky tags, ISO printable cards and much more! CDVI cards and tags are robustly made and available at very competitive prices. You can also customize our CDVI cards and badges with your own company logo; simply ask one of our representatives for more details. Specifications

• Mifare® card programmer.
• Compatible with all Mifare® CDVI tags.
• Hand-held terminal connect to a PC. (USB)