IX-SSA-RA SIP Compatible IP Emergency Station with a Single Emergency Call Button

Features

• SIP 2.0 compliant
• 802.3af PoE with PoE pass through (802.3at Type 2 PoE+)
• Emergency call button
• ADA compliant raised lettering and Braille signage
• Illuminated call button indicator
• Slot for micro SD card (not provided by Aiphone)
• IP65 rated, weather resistant (IP65)
• 2 contact outputs
• 6 trigger inputs

IX-DVF-2RA SIP Compatible IP Video Emergency Station with One Call Button and One Emergency Call Button

Features

• Use SIP to integrate with Cisco Unified Call Manager® and answer calls off-site
• ONVIF® Profile S Compliant
• Both “Call” and “Emergency” call buttons
• ADA compliant raised lettering and Braille signage
• 802.3af PoE with PoE pass through (802.3at Type 2 PoE+)
• 1.23 megapixel fixed color video camera
• Camera vertical adjustment +15º, 0º, or -8º (manual)
• White LED for low light illumination
• Capture and store the audio and video of active conversations on a microSD™ card (not provided by Aiphone)
• IP65 rated, weather resistant
• Stainless steel faceplate
• 2 contact outputs
• 6 trigger inputs
• 2-year warranty!

Modular Tower Components

Aiphone emergency solutions include towers and wall boxes featuring built-in UL Listed electrical boxes. These boxes easily satisfy local electrical codes and include integrated mounting hardware for power supplies or accessories. An optional CCTV camera arm module can be included to provide an enhanced view of Aiphone’s video intercom’s identifying view. Easily wire any tower using the rear access panels to pull wire from top to bottom. Features

• Convenient UL Listed electrical box integrated inside wall box and modular towers
• Modular tower design provides lower freight costs and easier assembly than traditional, non-modular towers
• Optional CCTV camera arm provides an additional line of sight to better assess unfolding situations
• Rear access panels on the back of each tower module make it easy to route wires up and down the tower
• Variety of tower configurations to meet facility needs (size, lettering, color)
• Beacon/strobe light on top of tower and wall box is always lit and flashes during an emergency call in
• Integrated mounting hardware in towers and wall boxes to quickly install accessory products safely inside unit
• Slim, 4” depth of wall box allows for proper ADA mounting height
• Compatible with IX Series and IS Series emergency stations
• LED for station illumination in middle module (Requires 24V DC )

Specifications

• Tower: 1/4” zinc treated steel with powder coating
• Wall Box: 12-gauge stainless steel
• Mounting Hardware: Tower: 4 mounts in lower and upper modules – External threads (male: M3 x .05)
• Wall Box: Single mount – Internal threads (female: M3 x .05)
• CCTV Camera Arm Thread: Universal pipe thread pattern – 1.50” NPT threading x 1” long
• Light/Strobe Power Source: DC 24V, use PS-2420UL

WB-CA Wall Box with Caged or Enclosed Light and ASSISTANCE Lettering

Features

• Made of 12 gauge stainless steel
• Caged beacon/strobe light on top
• Assistance Lettering
• ADA Compliant: 4″ depth to meet ADA requirements to allow mounting higher than 27″, and proper signage and call button mounting height
• Light/Strobe Power Source: DC 24V, use PS-2420UL
• Blue Assistance lettering: ADA Compliant